Removal And Installation: Installation

NOTE:

Check that the Bluetooth antenna is not damaged.

Courtesy of CHRYSLER GROUP, LLC

Position the Bluetooth antenna in position.
Install the two Bluetooth antenna mounting screws and tighten securely.
Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
Install the duct work back into position in the HVAC housing.
Install the two duct mounting nuts and tighten securely.
Install the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.