LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Antenna, Satellite, Amplifier >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

NOTE:

Right side shown in illustration, left side similar.

NOTE:

Check that the antenna amplifier is not damaged.

GC0197993Courtesy of CHRYSLER GROUP, LLC
  1. Position the antenna amplifier (1b) on the vehicle.
  2. Connect the wire harness connections (2a, 2b, 2c) to the antenna amplifier.
  3. Remove the antenna amplifier to body bolt (1a) and remove the antenna amplifier (1b) from the body.
  4. Install the C-pillar panel trim. Refer to PANEL, C-PILLAR TRIM, REMOVAL AND INSTALLATIONPANEL, C-PILLAR TRIM, LOWER, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals