Rear Cargo

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Open the decklid to gain access to the bottom side of the package shelf.

   Courtesy of CHRYSLER GROUP, LLC

3. Using a trim stick or suitable tool, remove the Low Frequency (LF) antenna housing by releasing the inner retainers (1b).
4. Release the pin (1d).
5. Remove the nuts (3a) securing the LF antenna to the LF antenna housing.
6. Disconnect the wiring harness connector (2) from the LF antenna.

INSTALLATION 

1. Inspect the LF antenna, the LF antenna housing and the LF antenna wiring harness integrity.

   Courtesy of CHRYSLER GROUP, LLC

2. Connect the wiring harness connector (3a) to the LF antenna.
3. Position the LF antenna on the housing. Install and securely tighten the nuts (2).
4. Install the LF antenna housing (4a) to the package tray by securing the housing clips (4c) and pin (4b).
5. Connect the negative battery cable.