DTC B2375: Rain Sensing Malfunction
| DTC Description | DTC |
|---|---|
| B2375 Rain Sensing malfunction |
DTC (Automatic Lighting/Rain Sensor)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC ChecksBody Electrical Troubleshooting - B-CAN System Diagnosis Test Mode 1 and Test Mode 2 (without the HDS)Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode B - Control Unit Not CommunicatingBody Electrical Troubleshooting - B-CAN System Diagnosis Test Mode C - No DTCs and Output Won't Shut OFFBody Electrical Troubleshooting - B-CAN System Diagnosis Test Mode D - No DTCs and Output Won't Turn ON .
- 1. Problem verification:
1. Clear the DTCs with the HDS.
2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
3. Check for DTCs with the HDS.
DTC Description DTC B2375 Rain Sensing malfunction Is DTC B2375 indicated?
YES
Go to step 2.
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- 2. Connector check:
1. Check for loose or poor connections at the automatic lighting/rain sensor 5P connector.
Is the connection OK?
YES
Go to step 3.
NO
Reconnect or repair the 5P connector.
- 3. Rain sensor visual check:
1. Remove the automatic lighting/rain sensor .
2. Check for dirt and dust on the surface of the rain sensor.
Is it dirty?
YES
Clean the rain sensor, and then recheck the system.
NO
Go to step 4.
- 4. Windshield glass visual check: Is it dirty or damaged?
YES
Clean the windshield and, if necessary, repair or replace the windshield glass.
NO