A/T gear position indicator does not indicate with the shift lever in that position

Probable cause(s)

• F-CAN communication line error
• Gauge control module defective
• Failure of A/T gear position indicator circuit
• Transmission range switch defective or out of adjustment
• PCM defective

Notes

• Troubleshoot the A/T gear position indicator circuit .
• Check the F-CAN communication line .
• Check the F-CAN communication line by using the gauge control module self-diagnostic function .
• Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function .
• Inspect the transmission range switch .