LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2016 >> CR-V EX, Eng CD K24W9, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio Visual System - Testing & Troubleshooting >> Diagnostics >> Audio System Sound Quality Diagnosis >> Seek Stop Test

Seek Stop Test

Seek Stop Test 

Do this test to check the performance of the audio-navigation unit's or the audio unit's AM and FM reception. Refer to symptom troubleshooting before continuing with this test:

NOTE: 

1. Park the customer's vehicle in an open area away from buildings or other obstructions

2. Park a known-good vehicle (same year, model, and trim level) next to the customer's vehicle, facing the same direction

3. Start the engine in the customer's vehicle, and turn on the radio

4. Set the FM receiver to 87.7 MHz

5. Press the Seek + button and record the first station that the audio-navigation unit or the audio unit locks onto

6. Press the Seek + button repeatedly, and write down each station that the audio-navigation unit or the audio unit locks onto until the station recorded in step 5 is reached again

7. Set the AM receiver to 530 kHz

8. Press the Seek + button, and record the first station that the audio-navigation unit or the audio unit locks onto

9. Press the Seek + button repeatedly, and write down each station that the audio-navigation unit or the audio unit locks onto until the station recorded in step 8 is reached again

10. Press the engine start/stop button to select the OFF mode

11. Start the engine in the known-good vehicle, and then do steps 4 thru 10 on the known-good vehicle

12. Compare the number of stations received in steps 6 and 9 in the customer's vehicle with the number of stations received in the known-good vehicle.