LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.9L - Cooling System) >> Engine >> Bottle, Pressurized Coolant >> Removal And Installation >> Low Temperature Pressurized Coolant Bottle >> Installation

Low Temperature Pressurized Coolant Bottle: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the turbocharger pressurized coolant bottle and securely tighten the screw and the nut.
  2. Install the degassing pipe quick connector.
  3. Install the coolant supply hose quick connector, reservoir side.
  4. Fill the turbocharger cooling system. Refer to DRAINING AND FILLING THE TURBOCHARGER COOLING SYSTEM  .
  5. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  6. Install the front bumper. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
  7. Install the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, REAR, REMOVAL AND INSTALLATION or BELLY PAN, REAR SUSPENSION, REMOVAL AND INSTALLATION or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals