Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR FUEL SYSTEM OR IGNITION SYSTEM DTCS PRESENT
- Turn the ignition on.
- With the scan tool, read DTCs and record on the repair order.
Are there any fuel or ignition system DTCs present?
Yes
- Perform the diagnostics for the fuel or ignition system related DTC(s) before proceeding with this diagnostic procedure.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
No
- Go To 2
- PERFORM THE ENGINE CRANKS BUT DOES NOT START DIAGNOSTIC PROCEDURE
- Perform the ENGINE CRANKS BUT DOES NOT START diagnostic procedure. Refer to the appropriate service information CHECKING THE LOW PRESSURE FUEL DELIVERY SYSTEM
.
Were any problems found?
Yes
- Perform the appropriate repair.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
No
- Perform the ENGINE WILL NOT CRANK diagnostic procedure. Refer to NO CRANK (BCM EQUIPPED) .
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
- Perform the ENGINE CRANKS BUT DOES NOT START diagnostic procedure. Refer to the appropriate service information CHECKING THE LOW PRESSURE FUEL DELIVERY SYSTEM
.