Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR AN ACTIVE DTC
- Turn the ignition on.
- With the scan tool, read DTCs and record on the repair order.
Is the DTC active or pending?
Yes
- Go To 2
No
- Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION .
- CHECK THE BODY CONTROL MODULE FOR LEFT FRONT DOOR AJAR SWITCH DTCS
- With the scan tool, read BCM DTCs.
Is the BCM setting any DTCs against the Left Front Door Ajar Switch?
Yes
- Perform the diagnostic procedure in the BCM. Refer to DIAGNOSIS AND TESTING .
No
- Replace and program the Body Control Module in accordance with the Service Information. Refer to MODULE, BODY CONTROL (BCM), REMOVAL AND INSTALLATION .
- With the scan tool, read BCM DTCs.