Possible Causes
WARNING: This page is about a different variant/trim than selected.
| Possible Causes |
|---|
| EVAP PURGE SOLENOID VACUUM LINE LEAKING OR BROKEN |
| LEAK IN THE LINE BETWEEN THE EVAP PURGE SOLENOID AND EVAPORATIVE CANISTER |
| ELCM PRESSURE SENSOR 5-VOLT SUPPLY OPEN/HIGH RESISTANCE |
| ELCM PRESSURE SENSOR OUT OF RANGE |
| EVAP PURGE SOLENOID |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .