Possible Causes
WARNING: This page is about a different variant/trim than selected.
| Possible Causes |
|---|
| ELCM PRESSURE SENSOR 5-VOLT SUPPLY OPEN/HIGH RESISTANCE |
| EVAP PURGE SOLENOID VACUUM LINE LEAKING OR BROKEN |
| EVAP PURGE SOLENOID VACUUM LINE OR PORT RESTRICTED/OBSTRUCTED |
| PINCHED/OBSTRUCTED LINE BETWEEN THE EVAP PURGE SOLENOID AND CANISTER |
| PINCHED/OBSTRUCTED LINE BETWEEN THE CANISTER AND FUEL TANK |
| ELCM PRESSURE SENSOR OUT OF RANGE |
| EVAP PURGE SOLENOID |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .