Anti-Theft System - Pats
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Theft-Passive Anti-Theft System (PATS)
- Passive Anti-Theft System (PATS)-Inspection and Verification
- Passive Anti-Theft System (PATS)-Diagnostic Trouble Codes (DTC) Index
- Passive Anti-Theft System (PATS)--Diagnostic Trouble Codes (DTC) Descriptions
- Passive Anti-Theft System (PATS)--Symptom Chart
- Passive Anti-Theft System (PATS) - Pinpoint Tests
- Pinpoint Test B1213-: Anti-Theft Number Of Programmed Encoded Ignition Keys Below Minimum
- Pinpoint Test B2103-: Antenna Not Connected-- Defective Transceiver
- Pinpoint Test B1600-: No Key Code Received - Damaged Encoded Ignition Key Or Use Of Non-Pats Encoded Ignition Key
- Pinpoint Test B1601-: Unprogrammed Encoded Ignition Key (KEYCODE Format OK)
- Pinpoint Test B1602-: Invalid Key Code Format From Encoded Ignition Key Transponder (Partial Key Read)
- Pinpoint Test B1681-: Pats Transceiver Signal Is Not Received (Not Connected, Damaged, Or Wiring)
- Pinpoint Test B2139-: PCM ID Does Not Match Between Pats And PCM
- Pinpoint Test B2141-: No Security ID Exchange Between Pats And PCM
- Pinpoint Test U1147-: Faulty SCP Link Or Incorrect Pcm Calibration
- Pinpoint Test A: No Communication With The Module
- Pinpoint Test B: The Anti-Theft Is Always/Never On - No Three-Second Anti-Theft Indicator Prove Out
- General Procedures
- Removal And Installation